Velocity Edge MX230 Manual do Utilizador descarregar pdf (Página 18)

STEP 37

Install the steering valve/steering sensor harness.

Start at the front axle where the steering angle

sensor will be located. Route the cable back under

the tractor over to the steering valve / transducer,

then under the cab and back into the rear of the cab

to the controller mounting area. Make all the valve/

transducer connections. Secure the harness with tie

straps along the harness route.

STEP 38

Replace the air cleaner cover. Replace engine side

panel/door.

STEP 39

Be sure that all hydraulic connections are tight.

Check the machine hydraulic oil level and add oil as

needed.

Re-connect the battery and start the machine to

check for hydraulic leaks. Disconnect the battery

after the leak check has been performed.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 45 46

Sem comentários

Velocity Edge MX230 Manual do Utilizador Página 18