Velocity Edge GX440 Guia do Utilizador descarregar pdf (Página 97)

Services Configuration

Rev 2.3 Feb.12 97

Time Delay + Low

Voltage

If you select this option, the device will delay going into Low Power mode caused by a low

voltage drop (below threshold) or ignition off.

• Low Voltage Threshold: Set the voltage level at which the device goes into low power

mode (threshold in tenths of volts).

Example: VLTG=130 would place the device in a low power standby state if the voltage

goes below 13.0V.

• Low Power Mode Delay (Minutes): The number of minutes after one of the Low Power

events happens until the AirLink device enters the Low Power mode.

Note: There is always a minimum of 1 minute between the power down event and actual

shutdown (to give the AirLink device time to prepare); entering zero, for Low Power Mode

Delay, will not power down the device immediately.

Periodic Timer If you select the Periodic Timer, two fields display:

• Periodic Timer Active Duration - Enter the time for how long the device needs to be in

Active mode

• Period Timer Inactive Duration - Enter the time for how long the device should be

inactive after the Active mode expires.

The Low Power mode process will repeat in a cyclical way (active and inactive).

Field Description

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 248 249

Sem comentários

Velocity Edge GX440 Guia do Utilizador Página 97